全国服务热线：
+86-0917-3307712
全国服务热线：
+86-0917-3307712
Features
◆ Wireless testing of pipeline pressure, typically used in oilfield wellhead pressure monitoring;
◆ Explosion-proof design: flameproof aluminum shell, circuit board system is intrinsically safe;
◆ Protection grade IP67 , fully sealed and waterproof design;
◆ ZigBee communication, it can be configured and tested with a hand copy device;
◆ LCD display: -40~70 ℃ wide temperature working range, can display pressure data, battery voltage, wireless channel and other information;
◆ Adjustable installation direction: It can be connected to the on-site pipeline valve through a live connection or an adapter, and the direction can be adjusted;
◆ 38Ah high-energy lithium sub-battery, long working life;
◆ High-gain antenna, wireless transmission distance of more than 200m ;
|
Measured medium |
Liquid, gas |
Reporting cycle |
1 minute to 12 hours can be set |
|
Pressure range |
0~60MPa can be customized |
Decimal places |
0~3 digits can be set |
|
Precision |
0.5 level |
Signal transmission |
ZigBee wireless |
|
Overload pressure |
150% FS |
Transmit power |
≤ 40mW |
Shape and installation
◎Dimensions
◎Installation
1. Make sure that the measurement range required by the process is consistent with the range of the transmitter to be installed.
2. The thread specifications of the joints for process installation must be matched with the transmitter.
3. To install the pressure transmitter on the pipeline, first close the valve (needle valve or gate valve) on the pipeline where the pressure transmitter is to be installed, and then there are two installation methods:
(1) Screw the transmitter directly into the upper port of the valve;
(2) Screw the live connection or adapter into the upper port of the valve, and then screw the transmitter into the upper port of the live connection or adapter. This installation method can adjust the direction by adding a live connection or adapter. After installation, open the needle valve to confirm that there is no leakage, that is, the installation is qualified.
Baoji XingYuTeng Measure and Control Instruments Co.,Ltd.
E-Mail: info@xytck.net
Tel:+86 917 3307712
Fax:+86 917 3307036
Address: 5 / F, block C, building 10, high-end equipment Industrial Park, high tech Zone, Baoji City
