Overview
1. Suitable for diffused silicon pressure sensor and ceramic pressure sensor. 2. Output two-wire 4-20mA signal.
Power supply: 12~30VDC. 3. It is suitable for making digital display pressure transmitter with 2088 shell.
Features
◆Fully intelligent two-wire 4-20mA working mode, 5 -digit LCD display.
◆The sensor is excited by constant current and constant voltage , constant current 0.4mA , constant voltage 2.5VDC .
◆ ADC input amplitude is ± 5mv~ ± 80mv , providing 24 -bit core resolution, and the useful number of bits reaches 18 bits.
◆The built-in magnification of the circuit board is 12~200 times. Support automatic polarity conversion of sensor signal.
◆Suitable for diffused silicon pressure sensor and ceramic pressure sensor.
◆Provide primary variable reset, active and passive migration function, 19 kinds of unit conversion, 6 kinds of display modes, display
Display resolution adjustment, restore factory data and other functions, suitable for the special needs of various customers.
◆ The non-linear correction function of 2~5 points can eliminate the non-linear error of the sensor.
◆Fully digital calibration, without any movable potentiometer, lower temperature drift.
◆Strengthen anti-interference design, suitable for all kinds of industrial environments with harsh electromagnetic environment.
voltage |
12~30VDC, 24VDC is recommended . The power supply changes have basically no effect. |
Signal range |
The circuit board is ± 5mv~ ± 80mv , and the output of the corresponding 1.5mA diffused silicon sensor can reach up to 320mv . |
Constant current excitation |
0.4mA , suitable for sensors with constant current power supply ( 3~8k Ω). |
working environment |
Temperature -30~80 ℃, humidity <85%, dry and non-corrosive environment |
Constant voltage excitation |
2.5VDC/0.5mA , suitable for ceramic piezoresistive sensors. |
Dimensions |
53*53*23 |
Load Resistance |
(VCC-12)/20mA |
Current output
Resolution |
About 1uA |
Temperature drift coefficient |
<35ppm/ ℃ |
Display range |
-19999~99999 |
Baoji XingYuTeng Measure and Control Instruments Co.,Ltd.
E-Mail: info@xytck.net
Tel:+86 917 3307712
Fax:+86 917 3307036
Address: 5 / F, block C, building 10, high-end equipment Industrial Park, high tech Zone, Baoji City